Andreas (you may have since got around this, ..... there were some comments in topic posted after this one) 'When a dynamic view is referenced into a layout, usually via a drawing model, the lineweight setting in the layout is simply ignored. The same applies to lineweight printing setting in the plot manager. This setting is simply ignored./ When you create a Clip Volume in a 3D model and it applies the Display Style (Forward,Cut, Bact, ect, ...), usually the Display Style has a line thickness defined in it settings. As far as I understand it, this line thickness will then take precedence over any subsequent attempts to change the line thickness (via the famiily/parts, or Level Manager/Overrides). My preference is to make sure all the Display Styles (generally speaking for producing Drawings anyway) should have the line thickness set OFF, or not defined. Then you can normally use the line homesickness' and styles from the usual family/parts and Levels Manager settings Hope that clears it up
↧